T O P I C R E V I E W |
CGD1985 | I am looking for a Driver's side rear track for the window regulator. I do not need the whole regulator. The rear slider broke and I am looking to replace it without having to buy a complete kit. I did look into the Tom Mills replacement, but it does not include the tracks, you are supposed to reuse the sliders, which mine is broken. |
ed monahan | There is a local who has some extra parts. I will see if he has what you need. |
ed monahan | There is a local who has some extra parts. I will see if he has what you need. |
ZPROWLER2000 | quote: Originally posted by CGD1985: I am looking for a Driver's side rear track for the window regulator. I do not need the whole regulator. The rear slider broke and I am looking to replace it without having to buy a complete kit.I did look into the Tom Mills replacement, but it does not include the tracks, you are supposed to reuse the sliders, which mine is broken.
PM phil2237 HE MIGHT HAVE IT,HE HELPED ME OUT WITH REGULATOR PARTS |
robin | just posted for Info purposes . Tom Mills is the best . http://www.ebay.com/itm/Plymouth-Chrysler-Prowler-Regulator-Rebuild-Service-Lifetime-Warranty/323414199451?fits=Year%3A2001%7CModel%3AProwler%7CMake%3APlymouth&hash=item4b4cfd0c9b: g:f8sAAOSwSPBacORw |
Tom Mills | CGD1985 Call Terry at Jefferson Auto. We can supply you a new regulator and we can also repair your broken rear channel. If you repair your regulator it will be temporary at best. 574-259-6875This message has been edited by Tom Mills on 10-06-2018 at 09:13 PM |
MIKE GATLIN | If you install Tom's regulator on the drivers side the only thing you will have to worry about is the regulator on the passenger side. |
alrtg | Years ago when Tom Mills introduced his replacement window regulator's, I bought a set for both sides even though my regulators were still functioning. I did not want to wait until my O.E. regulators chose to fail at the worst possible moment, so I elected to replace them when it was convenient for me. Since that time, I have been very happy with the replacement product and the knowledge that failure at an inconvenient tome is likely not going to happen. Also by replacing the regulators before a failure occurred, I avoided the chance of having the parts that needed to be reused breaking and resulting in additional complications. I have never regretted the decision to install the replacement Mills regulators. I considered it an ounce of prevention. |